Snorkel Dry-Top - For Swimmer's Snorkel
Patented design helps keep your snorkel free of water.
- When submerging under the water, a small buoy inside the Dry-Top rises, effectively sealing the tube.
- Water is then prevented from entering, keeping your snorkel completely dry!
- When you surface, the buoy drops, opening the air passage for maximum airflow.
- For use on FINIS Swimmer's Snorkels only.
- Not compatible with the "Freestyle Snorkel" or "Learn-to-Swim Snorkel".
Note that using the Snorkel Dry Top will slightly restrict air-flow into the tube. The Dry-Top attachment is recommended for experienced users.
Attaching / Removing Dry-Top:
- To attach, first soak the FINIS snorkel and Dry-Top attachment in very warm water for a few minutes. The warm water will loosen the plastic
materials so that the Dry-Top is easier to attach and remove.
- Next, line up the bottom of Dry-Top attachment with the top of the snorkel tube and press. Push until the attachment is snug and secure inside the tube.
- A water-tight seal will be created between the two pieces when cooled.
- To remove, soak the FINIS snorkel and Dry-Top attachment in very warm water for a few minutes again and carefully pull the Dry-Top attachment out. Do not
bend as this may result in breakage.
Tips:
- If the Dry-Top appears to be stuck in the snorkel tube, soak in hot water for a few minutes to loosen the materials. Wiggle the Dry-Top back and forth slightly to remove.
- If the Dry-Top happens to come apart during removal, the top-piece can be simply placed back on top without affecting the water-tight seal or Dry-Top performance.
- Note that using the Snorkel Dry Top will slightly restrict air-flow into the tube. The Dry-Top attachment is recommended for experienced users.
- Some water may enter the tube if the Dry-Top is used during flip-turns where the user goes upside down underwater.
|
|